Legislation database
Set a password
Clear

Explosives Regulations, 2003

248 rows

VerifiedCitationNumberSubsParaSubparaItemRoleText
–Explosives Regulations 11opening
In these Regulations “the Act “ means the Occupational Health and Safety Act, 1993(Act NO. 85 of 1993), and any word or expression to which a meaning has been assigned in the Act shall have the meaning so assigned and, unless the context otherwise indicates—
–Explosives Regulations 2(1)2(1)entry
Subject to subregulation (2), these regulations shall apply to any employer, self-employed person or user who operates an explosives workplace for the purpose of manufacturing, testing, storing or using explosives.
–Explosives Regulations 2(2)2(2)entry
These regulations shall not apply to explosives workplaces where the loading or reloading of cartridges for small arms is being carried out for private use and is not offered for sale, trade or any other use:
Note The source text reads “reioading”; repaired to “reloading”.
–Explosives Regulations 2(2)2(2)proviso
Provided that these Regulations do not detract from the requirements of the Arms and Ammunition Act, 1969 (Act No. 57 of 1969) or the Firearms Control Act, 2000 (Act No. 60 of 2000).
–Explosives Regulations 3(1)3(1)entry
The chief inspector of explosives shall classify all explosives and make this classification available to the chief inspector of occupational health and safety.
–Explosives Regulations 3(2)3(2)entry
The chief inspector of occupational health and safety may classify any chemical combination as an explosive or reclassify any explosive for the purposes of these regulations.
–Explosives Regulations 3(3)3(3)entry
No person shall manufacture or use any explosives that are not classified in terms of subregulations (1) and (2).
–Explosives Regulations 4(1)4(1)entry
Any person who desires to erect or operate a new explosives workplace for the manufacture, testing, use or storage of explosives shall apply for a licence in writing to the chief inspector of occupational health and safety.
–Explosives Regulations 4(2)4(2)entry
The licence of any explosives workplace which is in force at the time of the promulgation of these regulations shall be deemed valid:
–Explosives Regulations 4(2)4(2)proviso
Provided that the Licensing conditions as contemplated in these regulations shall be complied with within twelve months of promulgation of these regulations.
–Explosives Regulations 4(3)4(3)opening
The chief inspector of occupational health and safety—
–Explosives Regulations 4(3)(a)4(3)(a)entry
may issue a licence subject to compliance with these regulations and after consultation with the relevant employer, self-employed person or user and local government:
–Explosives Regulations 4(3)(a)4(3)(a)proviso
Provided that such licence shall lapse after twelve months if the erection of the building has not started within that period;
–Explosives Regulations 4(3)(b)4(3)(b)entry
may attach any condition to the licence that he or she deems reasonably necessary;
–Explosives Regulations 4(3)(c)4(3)(c)entry
may alter the condition of an existing licence after consultation with the employer, self-employed person, user and employees;
–Explosives Regulations 4(3)(d)4(3)(d)entry
shall not issue a licence where a competent explosives manager has not been appointed in terms of regulation 12 (1) or where the prescribed requirements have not been met;
–Explosives Regulations 4(3)(e)4(3)(e)entry
may upon application in writing transfer a licence into the name of another person:
–Explosives Regulations 4(3)(e)4(3)(e)proviso
Provided that the application shall be made prior to the transfer and the transferee shall appoint a competent explosives manager; and
–Explosives Regulations 4(3)(f)4(3)(f)entry
may revoke any licence issued in terms of this regulation if the prescribed conditions are no longer being complied with or where no competent explosive manager is appointed.
–Explosives Regulations 4(4)4(4)opening
Any person applying for a magazine or explosives workplace licence shall attach to such application—
–Explosives Regulations 4(4)(a)4(4)(a)entry
written authorization from the relevant local government for the proposed new magazine or workplace;
–Explosives Regulations 4(4)(b)4(4)(b)entry
written approval from the chief inspector of explosives concerning security aspects for the area and buildings of the proposed workplace or magazine;
–Explosives Regulations 4(4)(c)4(4)(c)entry
the letter of appointment of the competent explosives manager, including the acceptance of the appointment;
–Explosives Regulations 4(4)(d)4(4)(d)entry
the physical address of the explosives workplace or magazine;
–Explosives Regulations 4(4)(e)4(4)(e)entry
documentary proof of the explosives manager’s competency; and
–Explosives Regulations 4(4)(f)4(4)(f)entry
a full written report on the risk assessment compiled by an approved inspection authority.
–Explosives Regulations 4(5)4(5)opening
Any person applying for a licence to manufacture, use, test or store explosives in the proposed explosives workplace or magazine shall submit draft schedule licences, certified by the explosives manager, and drawings in duplicate setting forth the following:
–Explosives Regulations 4(5)(a)4(5)(a)entry
an area plan of the proposed site indicating the danger zone;
–Explosives Regulations 4(5)(b)4(5)(b)entry
a site plan, which is drawn to scale, is easily readable and clearly indicates the complete layout of the site and the danger zone;
–Explosives Regulations 4(5)(c)4(5)(c)entry
the safety distances, as contemplated in Annexure 1, which are to be maintained between danger buildings, and between danger buildings and other buildings or works used in connection with the explosives workplace;
–Explosives Regulations 4(5)(d)4(5)(d)entry
the compatibility of materials to be used in the construction of danger buildings;
–Explosives Regulations 4(5)(e)4(5)(e)entry
building plans for all danger buildings or works as designed and approved by a professional engineer;
–Explosives Regulations 4(5)(f)4(5)(f)entry
the nature of the process to be used in the workplace and the place at or in which he or she intends to implement each manufacturing process, activity and type of work;
–Explosives Regulations 4(5)(g)4(5)(g)opening
the places at or in which he or she proposes to store, destroy or test—
–Explosives Regulations 4(5)(g)(i)4(5)(g)(i)entry
any ingredient of explosives;
–Explosives Regulations 4(5)(g)(ii)4(5)(g)(ii)entry
other articles or substances which are liable to spontaneous ignition; and
–Explosives Regulations 4(5)(g)(iii)4(5)(g)(iii)entry
articles which are otherwise dangerous;
–Explosives Regulations 4(5)(h)4(5)(h)entry
the quantity of explosives, or any other partly or wholly mixed ingredients thereof, which he or she intends to use simultaneously in any danger room, danger building or complex:
–Explosives Regulations 4(5)(i)4(5)(i)entry
the maximum number of persons which he or she intends to employ in each danger room, danger building or complex; and
–Explosives Regulations 4(5)(j)4(5)(j)entry
any additional information that may be required by the chief inspector of occupational health and safety.
–Explosives Regulations 4(6)4(6)entry
Any person who desires to erect or operate a magazine for the storage of explosives shall apply in writing to the chief inspector of occupational health and safety for written approval.
–Explosives Regulations 4(7)4(7)entry
No person shall erect burning grounds within or near a danger area without an appropriate safe separation.
–Explosives Regulations 4(8)4(8)entry
Any person who desires to use explosives in a workplace for any purpose shall apply in writing to the chief inspector of occupational health and safety for written approval.
–Explosives Regulations 5(1)5(1)entry
Ammonium nitrate fertilizers shall be manufactured in such a way that the constituents cannot be separated mechanically from one another.
–Explosives Regulations 5(2)5(2)entry
Mixtures of ammonium nitrate with calcium carbonate, or dolomite, or calcium carbonate and dolomite, shall be manufactured in such a way that the calcium carbonate or dolomite is incorporated in the prills or granules of the mixture and shall be approved, in writing, by the chief inspector of explosives.
–Explosives Regulations 5(3)5(3)entry
Every person or concern manufacturing non-detonatable or non-sensitised explosives may apply to the chief inspector of occupational health and safety for exemption from these regulations with the exception of regulation 5.
–Explosives Regulations 5(4)5(4)entry
Application for exemption from these regulations is subject to the conditions that the chief inspector of occupational health and safety may stipulate for the safe manufacture, storage, testing and handling of non-detonatable or non-sensitised explosives.
–Explosives Regulations 5(5)5(5)opening
The basis for the safe manufacture of non-detonatable or non-sensitised explosives referred to in subregulation (4) shall include provision for the following safety measures:
–Explosives Regulations 5(5)(a)5(5)(a)entry
access control measures and equipment at the entry to the workplace area where the non-detonatable or non-sensitised explosives are manufactured, tested or stored shall restrict access to the manufacturing, testing and storage areas to authorised persons only:
–Explosives Regulations 5(5)(b)5(5)(b)entry
unauthorized access to manufacturing operations shall not be allowed, and measures and equipment to prevent access to potentially hazardous areas shall be provided;
–Explosives Regulations 5(5)(c)5(5)(c)opening
the following controls shall be in place at the separator stage in non-detonatable or non-sensitised explosives manufacture:
–Explosives Regulations 5(5)(c)(i)5(5)(c)(i)entry
temperature control;
–Explosives Regulations 5(5)(c)(ii)5(5)(c)(ii)entry
pH control;
–Explosives Regulations 5(5)(c)(iii)5(5)(c)(iii)entry
an inventory dumping system;
–Explosives Regulations 5(5)(c)(iv)5(5)(c)(iv)entry
control of process steam temperature and pressure; and
–Explosives Regulations 5(5)(c)(v)5(5)(c)(v)entry
procedures to prevent unsafe confinement of non-detonatable or non-sensitised explosives during operation or cleaning activities:
–Explosives Regulations 5(5)(d)5(5)(d)opening
the following controls shall be in place at the storage and pumping stage in non-detonatable or non-sensitised explosives manufacture:
–Explosives Regulations 5(5)(d)(i)5(5)(d)(i)entry
Interlocks that are able to trip;
–Explosives Regulations 5(5)(d)(ii)5(5)(d)(ii)entry
temperature control in heated storage tanks; and
–Explosives Regulations 5(5)(d)(iii)5(5)(d)(iii)entry
Tank level control;
–Explosives Regulations 5(5)(e)5(5)(e)opening
the following controls shall be in place during evaporation and heating of non-detonable or non-sensitised explosives for prilling and granulation:
–Explosives Regulations 5(5)(e)(i)5(5)(e)(i)entry
temperature control;
–Explosives Regulations 5(5)(e)(ii)5(5)(e)(ii)entry
pH control;
–Explosives Regulations 5(5)(e)(iii)5(5)(e)(iii)entry
an inventory dumping system; and
–Explosives Regulations 5(5)(e)(iv)5(5)(e)(iv)entry
control of process steam temperature and pressure;
–Explosives Regulations 5(5)(f)5(5)(f)entry
procedures to manage unsafe confinement of non-detonatable or nonsensitised explosives during operation or cleaning activities shall be in place;
Note The source text reads “shail”; repaired to “shall”.
–Explosives Regulations 5(5)(g)5(5)(g)entry
control of contaminants and additives and unsafe accumulation of such substances shall be prevented;
–Explosives Regulations 5(5)(h)5(5)(h)entry
controls of contaminants shall be in place during prilling or granulation;
–Explosives Regulations 5(5)(i)5(5)(i)entry
control of reducing components in the drying air shall be in place;
–Explosives Regulations 5(5)(j)5(5)(j)entry
the construction materials in all processes shall be checked for compatibility with non-detonatable or non-sensitised explosives with respect to corrosion and potential sensitising effects in the process;
–Explosives Regulations 5(5)(k)5(5)(k)opening
the following control during the storage and packing stages of non-detonatable or non-sensitised explosives shall be in place:
–Explosives Regulations 5(5)(k)(i)5(5)(k)(i)entry
control over use of combustible materials inside and close to storage areas;
–Explosives Regulations 5(5)(k)(ii)5(5)(k)(ii)entry
control over use of liquid fuels and vehicles in storage areas;
–Explosives Regulations 5(5)(k)(iii)5(5)(k)(iii)entry
control of mechanical condition of non-detonatable or non sensitised explosives transport and storage equipment;
–Explosives Regulations 5(5)(k)(iv)5(5)(k)(iv)entry
control of potential contamination in non-detonatable or non-sensitised explosives transport containers;
–Explosives Regulations 5(5)(k)(v)5(5)(k)(v)entry
controls for appropriate fire-fighting equipment;
–Explosives Regulations 5(5)(k)(vi)5(5)(k)(vi)entry
control of pH in solution storage; and
–Explosives Regulations 5(5)(k)(vii)5(5)(k)(vii)entry
prevention of unsafe confinement of non-detonatable or non-sensitised explosives.
–Explosives Regulations 6(1)6(1)opening
An employer, self-employed person or user shall ensure that entry and exit from danger areas is only permitted—
–Explosives Regulations 6(1)(a)6(1)(a)entry
at the permanent authorised point of entry or exit:
–Explosives Regulations 6(1)(a)6(1)(a)proviso
Provided that entry or exit at any other point may be authorised by the explosives manager or a person authorised by him if the authorized gatekeeper has been informed thereof;
–Explosives Regulations 6(1)(b)6(1)(b)entry
for persons and vehicles authorized thereto by the explosives manager or a person authorized by him; and
–Explosives Regulations 6(1)(c)6(1)(c)entry
to visitors under escort by an authorized person who is aware of the hazards attached to the danger area.
–Explosives Regulations 6(2)6(2)entry
An employer shall keep a register of the entries and exits contemplated in subregulation (1) and that register shall be available on the premises for inspection by an inspector.
–Explosives Regulations 6(3)6(3)opening
No person shall—
–Explosives Regulations 6(3)(a)6(3)(a)entry
enter or exit the danger area through an unauthorized point of entry or exit;
–Explosives Regulations 6(3)(b)6(3)(b)entry
enter or exit the danger area without first submitting themselves to a search by the authorised gatekeeper;
–Explosives Regulations 6(3)(c)6(3)(c)opening
enter the danger area with—
–Explosives Regulations 6(3)(c)(i)6(3)(c)(i)entry
tobacco;
–Explosives Regulations 6(3)(c)(ii)6(3)(c)(ii)entry
matches, cigarette lighters or other devices capable of generating heat or spark sources;
–Explosives Regulations 6(3)(c)(iii)6(3)(c)(iii)entry
intoxicating liquor or narcotics;
–Explosives Regulations 6(3)(c)(iv)6(3)(c)(iv)entry
food, medicine or drinkable fluids:
–Explosives Regulations 6(3)(c)(iv)6(3)(c)(iv)proviso
Provided that authorisation to enter with such articles may be granted by the explosives manager for purposes of consumption in licensed mess rooms and smoking areas:
–Explosives Regulations 6(3)(c)(iv)6(3)(c)(iv)proviso
Provided further that special rules for the control of such consumption and smoking, approved by the chief inspector of occupational health and safety shall be made in writing and shall be enforced by the employer, self-employed person or user; or
–Explosives Regulations 6(3)(c)(v)6(3)(c)(v)entry
radio transmitters or cellular telephones; or
–Explosives Regulations 6(3)(d)6(3)(d)entry
perform any act or deed that will increase the risk attached to work being performed in a danger area.
–Explosives Regulations 6(4)6(4)entry
An employer, self-employed person or user shall not erect any buildings in the danger zone without first obtaining written approval from the chief inspector of occupational health and safety and complying with regulation 4 (5).
–Explosives Regulations 6(5)6(5)entry
An employer, self-employed person or user shall fence-in the danger area in accordance with the South African Police Services Code of Practice SAP 412: Fencing Specifications.
–Explosives Regulations 6(6)6(6)entry
An employer, self-employed person or user shall ensure that hazard warning signs are clearly displayed at the entrance to any danger area, magazine or workplace.
–Explosives Regulations 7(1)7(1)entry
An employer, self-employed person or user shall ensure without derogating from the requirements of the Fire Brigade Services Act, 1987 (Act NO. 99 of 1987), that all fire-fighting appliances and emergency equipment provided in the danger building or room are so placed and kept that they are readily visible, accessible and available for use when required,
–Explosives Regulations 7(2)7(2)entry
No person shall discharge any fire extinguisher or tamper with any equipment without thereafter informing the explosives manager.
–Explosives Regulations 7(3)7(3)entry
An employer, self-employed person or user shall ensure that no danger building is used unless the ambient temperature and relative humidity inside the building and the temperature of the explosives in the building are within the limits prescribed by the explosives manager.
–Explosives Regulations 7(4)7(4)opening
An employer, self-employed person or user shall—
–Explosives Regulations 7(4)(a)7(4)(a)entry
take all reasonable precautions to prevent foreign materials such as grit, stones or similar objects from entering danger buildings;
–Explosives Regulations 7(4)(b)7(4)(b)entry
ensure that no charcoal, whether ground or otherwise, oily rag or other article susceptible to spontaneous ignition is taken into any danger building, unless such article is required for immediate use in a specified place and, upon cessation of such use, is removed forthwith: and
Note The source text reads “buiiding”; repaired to “building”.
–Explosives Regulations 7(4)(c)7(4)(c)entry
not permit any article not listed on the loose article list to be used or to be present in a danger building.
–Explosives Regulations 7(5)7(5)opening
An employer, self-employed person or user shall ensure that—
–Explosives Regulations 7(5)(a)7(5)(a)entry
every danger building is protected against lightning in accordance with South African Bureau of Standards Code of Practice SABS 0313, The Protection of Structures against Lightning;
–Explosives Regulations 7(5)(b)7(5)(b)entry
every lightning protection system is examined and tested by a person with sufficient knowledge, training and experience in lightning protection:
–Explosives Regulations 7(5)(c)7(5)(c)entry
the examination and testing contemplated in paragraph (b) is carried out at least every 12 months in the month of September for summer rainfall areas and in January for winter rainfall areas;
–Explosives Regulations 7(5)(d)7(5)(d)entry
the results of every examination and testing contemplated in paragraph (b) are recorded in a register and are made available on the premises for inspection by an inspector; and
–Explosives Regulations 7(5)(e)7(5)(e)entry
all danger buildings with metal walls or roofs, and all plant and machinery in such buildings, are adequately earthed and bonded in accordance with South African Bureau of Standards Code of Practice SABS 0142, The Wiring of Premises, Part 1, Low Voltage Installations, and SABS 0108, The Classification of Hazardous Locations and the Selection of Apparatus for Use in Such Locations.
–Explosives Regulations 7(6)7(6)opening
An employer, self-employed person or user shall ensure that—
–Explosives Regulations 7(6)(a)7(6)(a)entry
the official number of the building is affixed on the outer wall near the main door to every building within the danger area;
–Explosives Regulations 7(6)(b)7(6)(b)entry
a copy of the schedule licence is permanently affixed in a conspicuous position inside every building in the danger area; and
–Explosives Regulations 7(6)(c)7(6)(c)entry
a loose article list, approved by the explosives manager, is permanently affixed in a conspicuous position inside every danger building:
–Explosives Regulations 7(6)(c)7(6)(c)proviso
Provided that all such numbering and documentation shall be printed or typed.
–Explosives Regulations 7(7)7(7)opening
An employer, self-employed person or user shall ensure that—
–Explosives Regulations 7(7)(a)7(7)(a)entry
all danger buildings are maintained in good order and that the interior, including benches, shelves and fittings, of every building in which any manufacturing process takes place or which may, at any stage of the process of manufacture, contain explosives or any ingredients thereof, either mixed or partially mixed, is kept clean and free from foreign materials to the extent that is reasonably practicable;
–Explosives Regulations 7(7)(b)7(7)(b)entry
before any maintenance, repairs or new installations are done to or in any danger building, that building is cleaned to the extent that is reasonably practicable, by the removal of all explosives and ingredients thereof, whether mixed or otherwise, and, if necessary, by the thorough washing out of the building or part of the building to or in which such maintenance, repairs or new installations is required;
–Explosives Regulations 7(7)(c)7(7)(c)entry
a work permit, approved by the explosives manager is issued prescribing the procedures to be followed for maintenance, repairs or new installations;
–Explosives Regulations 7(7)(d)7(7)(d)entry
all the doors of the danger building remain unlocked while persons are present during operations;
–Explosives Regulations 7(7)(e)7(7)(e)entry
steps are taken to ensure that doors to danger buildings do not slam; and
–Explosives Regulations 7(7)(f)7(7)(f)entry
all machinery and fittings are maintained and operated in accordance with the design specifications of the manufacturer and any other specifications prescribed by the explosives manager.
–Explosives Regulations 8(1)8(1)opening
An employer, Self-employed person or user shall ensure that—
–Explosives Regulations 8(1)(a)8(1)(a)entry
an explosives workplace is established, erected, operated and maintained in such a manner as to prevent the exposure of persons to hazardous or potentially hazardous conditions or circumstances;
–Explosives Regulations 8(1)(b)8(1)(b)entry
no part of the explosives workplace is used for any other purpose not authorized by the explosives workplace licence;
Note The source text reads “workpIace”; repaired to “workplace”.
–Explosives Regulations 8(1)(c)8(1)(c)entry
all materials used in the construction of a danger building are of a design approved by a professional engineer and acceptable to the chief inspector of occupational health and safety;
–Explosives Regulations 8(1)(d)8(1)(d)opening
provision has been made for—
–Explosives Regulations 8(1)(d)(i)8(1)(d)(i)entry
escape routes;
–Explosives Regulations 8(1)(d)(ii)8(1)(d)(ii)entry
the prevention of confined spaces;
–Explosives Regulations 8(1)(d)(iii)8(1)(d)(iii)entry
the safety of electrical appliances;
–Explosives Regulations 8(1)(d)(iv)8(1)(d)(iv)entry
lightning protectors; and
–Explosives Regulations 8(1)(d)(v)8(1)(d)(v)entry
vertical clearance between buildings and overhead power lines of not less than 30 meters;
–Explosives Regulations 8(1)(e)8(1)(e)entry
a copy of the special rules, regulations and operating instructions is made readily available to all employees within the danger area; and
–Explosives Regulations 8(1)(f)8(1)(f)entry
a maintenance and inspection schedule is prepared and implemented by the explosives manager in respect of all danger buildings, fittings, plant and machinery in use in the danger area.
–Explosives Regulations 8(2)8(2)opening
An employer, self-employed person or user shall—
–Explosives Regulations 8(2)(a)8(2)(a)entry
in the event of any abnormal conditions being discovered or any unusual occurrence taking place, cause operations to be stopped immediately:
–Explosives Regulations 8(2)(a)8(2)(a)proviso
Provided that where this is not possible, owing to the nature of the process, emergency procedures shall be laid down and immediate action taken in terms of those procedures; and
–Explosives Regulations 8(2)(b)8(2)(b)entry
notwithstanding authorised licence Iimits, reduce the quantity of explosives, or raw materials, or the number of persons at any one workplace whenever this is reasonably practicable.
–Explosives Regulations 8(3)8(3)entry
No person shall manufacture explosives in any manner not provided for in these regulations unless written permission for such manufacture has been obtained from the chief inspector of occupational health and safety.
–Explosives Regulations 99opening
No employer shall use or require or permit the use of any building, installation, room, machine or equipment unless—
–Explosives Regulations 9(a)9(a)entry
it has been designed and constructed in accordance with health and safety standards incorporated in these regulations in terms of section 44 of the Act;
–Explosives Regulations 9(b)9(b)entry
it has been approved by an approved inspection authority contemplated in regulation 18 or any foreign inspection authority recognized by the chief inspector of occupational health and safety; and
–Explosives Regulations 9(c)9(c)entry
the employer, self-employed person or user is in possession of a certificate issued by the manufacturer of the machines or equipment:
–Explosives Regulations 9(c)9(c)proviso
Provided that such certificate shall be countersigned by an approved inspection authority.
–Explosives Regulations 1010entry
Subject to any applicable law, any person intending to import explosives to be used in manufacturing or testing shall obtain permission from the chief inspector of occupational health and safety in writing, specifying the kinds and quantities thereof prior to importation.
–Explosives Regulations 11(1)11(1)opening
An employer, self-employed person or user shall—
–Explosives Regulations 11(1)(a)11(1)(a)entry
apply the safety distances for the respective categories of explosives as stipulated in Annexure 1 to these regulations;
–Explosives Regulations 11(1)(b)11(1)(b)entry
where less than five kilograms of explosives is used, apply to the chief inspector of occupational health and safety for a determination of a safety distance which the employer shall enforce;
–Explosives Regulations 11(1)(c)11(1)(c)entry
in the case of quantities of class 1.1 and 1.5 explosives exceeding five kilograms, ensure that the structures or areas where they are manufactured, stored, tested or handled in any manner, are mounded:
–Explosives Regulations 11(1)(c)11(1)(c)proviso
Provided that where, with the permission of the chief inspector of occupational health and safety, mounds are dispensed with, the distances given in columns (1), (2) and (3) of Annexure 1 shall be doubled.
–Explosives Regulations 11(2)11(2)opening
An employer, self-employed person or user may reduce the distances in column (1) of Annexure 1 where ground-covered magazines are used in explosives workplace magazine areas:
–Explosives Regulations 11(2)11(2)proviso
Provided that the doors of the magazines do not face each other—
–Explosives Regulations 11(2)(a)11(2)(a)entry
between magazines: by half the distance; or
–Explosives Regulations 11(2)(b)11(2)(b)entry
for magazines behind each other: by three-quarters of the distance.
–Explosives Regulations 12(1)12(1)entry
In order to ensure that the provisions of the Act and these regulations in relation to explosives workplaces are complied with, an employer, self-employed person or user shall, subject to this regulation, in writing appoint a competent and certificated person in a full-time capacity to be explosives manager in respect of every workplace where explosives are being used, tested, stored or manufactured:
–Explosives Regulations 12(1)12(1)proviso
Provided that the appointment of an explosives manager shall not exempt the employer, self-employed person or user from any liability or responsibility contemplated in section 16 of the Act.
Note The source text reads “selfemployed”; repaired to “self-employed”.
–Explosives Regulations 12(2)12(2)entry
The chief inspector of occupational health and safety may, subject to the conditions that he or she may impose, permit an employer or user to appoint more than one person in terms of subregulation (1).
–Explosives Regulations 12(3)12(3)entry
An employer or user shall appoint one or more persons, who are suitably qualified and experienced, as authorized supervisors to assist the explosives manager appointed in terms of subregulation (1).
–Explosives Regulations 12(4)12(4)opening
An employer, self-employed person or user shall ensure that—
–Explosives Regulations 12(4)(a)12(4)(a)opening
the explosives manager, without derogating from any other duties imposed on him or her by the Act and these regulations—
–Explosives Regulations 12(4)(a)(i)12(4)(a)(i)entry
approves in writing the rules, methods, materials, equipment and tools to be used in the danger area;
–Explosives Regulations 12(4)(a)(ii)12(4)(a)(ii)entry
ensures that all persons under his or her control are informed of the hazards related to their tasks and are thoroughly trained in safe work procedures, in particular with respect to shock, friction risk of fire, or static electricity, and are familiar with the requirements of these regulations;
–Explosives Regulations 12(4)(a)(iii)12(4)(a)(iii)entry
prescribes all protective clothing and equipment to be used in the danger area; and
–Explosives Regulations 12(4)(a)(iv)12(4)(a)(iv)entry
ensures that the processes and equipment specified in schedule licences are safe and appropriate for the manufacturing processes envisaged for the workplace;
–Explosives Regulations 12(4)(b)12(4)(b)opening
the supervising official, without derogating from any other duties imposed on him or her by the Act and these regulations—
–Explosives Regulations 12(4)(b)(i)12(4)(b)(i)entry
is at all times in a position to exercise control over the operations in the danger building;
–Explosives Regulations 12(4)(b)(ii)12(4)(b)(ii)entry
reports without delay to the explosives manager any plant or equipment under his or her control that has or may have posed a risk:
–Explosives Regulations 12(4)(b)(iii)12(4)(b)(iii)entry
ensures that all rules implemented in the interest of health and safety are at all times complied with; and
–Explosives Regulations 12(4)(b)(iv)12(4)(b)(iv)entry
stops all explosives manufacturing or any work involving explosives if he or she becomes aware of any risk posed to the health and safety of persons.
–Explosives Regulations 13(1)13(1)opening
An employer, self-employed person or user shall ensure that—
–Explosives Regulations 13(1)(a)13(1)(a)entry
all explosives or ingredients thereof are at all times free of foreign material;
–Explosives Regulations 13(1)(b)13(1)(b)entry
all reasonable precautions are taken to prevent the spillage of explosives;
–Explosives Regulations 13(1)(c)13(1)(c)entry
cleaning procedures in the case of a spillage of explosives are prescribed in writing by the explosives manager:
–Explosives Regulations 13(1)(c)13(1)(c)proviso
Provided that where no cleaning procedures have been prescribed any unusual spillage of explosives shall be reported immediately to the supervising official;
–Explosives Regulations 13(1)(d)13(1)(d)entry
all waste, paper, timber, rags, cotton and similar materials that have been in contact with explosives or an ingredient of an explosive are disposed of in a manner prescribed in writing by the explosives manager:
–Explosives Regulations 13(1)(d)13(1)(d)proviso
Provided that at the end of the working day all waste and floor sweepings from danger buildings shall be deposited in the designated places;
–Explosives Regulations 13(1)(e)13(1)(e)entry
the explosives or partly mixed explosives are conveyed as soon and as carefully as possible and taking such precautions and in such a manner as will effectively guard against any accidental ignition or explosion;
–Explosives Regulations 13(1)(f)13(1)(f)entry
only containers provided for the conveyance of explosives are used for transporting explosives or partly mixed explosives and that such containers are at all times kept clean, free from grit and in a good state of repair;
–Explosives Regulations 13(1)(g)13(1)(g)entry
vehicles containing explosives are left unattended only in designated places;
–Explosives Regulations 13(1)(h)13(1)(h)entry
except for drying purposes, preparation on burning grounds or testing, explosives are not exposed to direct rays of the sun or to rain, whether being transported or not; and
–Explosives Regulations 13(1)(i)13(1)(i)entry
manufactured explosives are removed as soon as is reasonably possible from the process building to an explosives workplace magazine or that they are immediately dispatched.
–Explosives Regulations 13(2)13(2)opening
An employer, self-employed person or user shall ensure that—
–Explosives Regulations 13(2)(a)13(2)(a)entry
all material, equipment, tools or similar articles used in a danger area are decontaminated after such use, and that no person makes use of any such article that has not been decontaminated after use in a contaminated area; and
–Explosives Regulations 13(2)(b)13(2)(b)entry
the certification of the decontamination process contemplated in paragraph (a) is certified and approved by the explosives manager or a person authorised by the explosives manager.
–Explosives Regulations 13(3)13(3)opening
Unless permission has been granted by the chief inspector of occupational health and safety, no person shall use—
–Explosives Regulations 13(3)(a)13(3)(a)entry
explosives in workplaces other than explosives workplaces approved by the chief inspector of occupational health and safety; and
–Explosives Regulations 13(3)(b)13(3)(b)entry
any explosives for which no provision is made in these regulations.
–Explosives Regulations 13(4)13(4)opening
An employer, self-employed person or user shall ensure that—
–Explosives Regulations 13(4)(a)13(4)(a)entry
explosives are transported and stored together or separately in the explosives workplace in accordance with the compatibility group assignments given in the South African Code of Practice SABS 0228, The Identification and Classification of Dangerous Goods for Transport; and
–Explosives Regulations 13(4)(b)13(4)(b)entry
when explosives can be categorised in more than one group, they are deemed to belong exclusively to the higher risk compatibility group given in the South African Code of Practice SABS 0228: The Identification and Classification of Dangerous Goods for Transport.
–Explosives Regulations 13(5)13(5)opening
No person shall—
–Explosives Regulations 13(5)(a)13(5)(a)entry
by leaving explosives unattended allow unauthorized access to such explosives; and
–Explosives Regulations 13(5)(b)13(5)(b)entry
bury, dump, hide or abandon any explosives.
–Explosives Regulations 13(6)13(6)opening
No person shall use any explosive material for blasting purposes unless—
–Explosives Regulations 13(6)(a)13(6)(a)entry
he or she is in possession of a written permission issued by or under the authority of the chief inspector of occupational health and safety;
–Explosives Regulations 13(6)(b)13(6)(b)entry
he or she is undergoing training while using such blasting material under the immediate and constant supervision of a person who is in possession of a permission contemplated in paragraph (a);
–Explosives Regulations 13(6)(c)13(6)(c)entry
he or she is trained and is authorised by the chief inspector of occupational health and safety to destroy or test explosives in a licensed workplace; or
–Explosives Regulations 13(6)(d)13(6)(d)opening
if the blasting material is used in a workplace other than a manufacturing or testing workplaces he or she—