Defined terms
40 terms
| Verified | Term | Defined in | Definition |
|---|---|---|---|
| – | accreditation authority | Pressure Equipment Regulations 1 | “accreditation authority” means the South African National Accreditation System (SANAS) established by section 3 of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act No. 19 of 2006); |
| – | appliance | Pressure Equipment Regulations 1 | “appliance” means an appliance as defined in SANS 1539; |
| – | ASME | Pressure Equipment Regulations 1 | “ASME” means the American Society of Mechanical Engineers; |
| – | authorised person | Pressure Equipment Regulations 1 | “authorised person” means a person who is registered as competent within the scope of work for which an organisation approved by the chief inspector has registered that person; |
| – | certificate | Pressure Equipment Regulations 1 | “certificate” means a written declaration of conformance to these Regulations; |
| – | construction | Pressure Equipment Regulations 1 | “construction” includes materials, design, fabrication, modification, repair, installation, examination, inspection, testing and certification; |
| – | dangerous substance | Pressure Equipment Regulations 1 | “dangerous substance” means a substance defined and classified as such in terms of SANS 10228; |
| – | design pressure | Pressure Equipment Regulations 1 | “design pressure” means the gauge pressure used in the design formulae to determine the dimensions of the component parts of the pressure equipment; |
| – | design temperature | Pressure Equipment Regulations 1 | “design temperature” means the temperature used in the design formulae to determine the dimensions of the component parts of the pressure equipment; |
| – | design verification | Pressure Equipment Regulations 1 | “design verification” means verification that the pressure equipment complies with the applied design of the relevant health and safety standard and the requirements of these Regulations; |
| – | fire extinguisher | Pressure Equipment Regulations 1 | “fire extinguisher” means a rechargeable container which has a fire extinguishing substance that is expelled by the action of internal pressure for the purpose of extinguishing a fire; |
| – | fluid | Pressure Equipment Regulations 1 | “fluid” means gases, liquids, vapours in pure phase and mixtures thereof and may contain solids in suspension; |
| – | gas | Pressure Equipment Regulations 1 | “gas” means gases, liquefied gases, gases dissolved under pressure, vapours, and those liquids whose vapour pressure at the design temperature is greater than 50kPa above normal atmospheric pressure; |
| – | gas system | Pressure Equipment Regulations 1 | “gas system” means an assembly of tubes, pipes or similar ducts, fittings and valves for the reticulation, circulation and conveyance of a gas, excluding a pressure vessel or transportable gas container connected to the system; |
| – | latent defect | Pressure Equipment Regulations 1 | “latent defect” means a fault inherent in pressure equipment, resulting from deficiencies in the design or manufacturing process that may cause a health and safety risk; |
| – | manufacturer | Pressure Equipment Regulations 1 | “manufacturer” means any person who has overall control and is responsible for the construction of the pressure equipment; |
| – | modification | Pressure Equipment Regulations 1 | “modification” means any change to the original design conditions of pressure equipment, including re-rating, or the addition or removal of elements that could affect the integrity of the pressure equipment, and “modify” has a corresponding meaning; |
| – | non-metallic | Pressure Equipment Regulations 1 | “non-metallic” means glass, thermoplastic or thermosetting polymeric reinforced and un-reinforced materials or combinations thereof; |
| – | pipeline | Pressure Equipment Regulations 1 | “pipeline” means piping or a system of piping designed for the transport and distribution of any fluid from an installation that is onshore or offshore, starting from and including the last isolation device located within the confines of the installation, including all the auxiliary equipment designed specifically for that pipeline; |
| – | piping | Pressure Equipment Regulations 1 | “piping” means pipes, tubes or flexible pressure hose elements intended for the transport or distribution of any fluid at a pressure of 50 kPa or above when connected together for integration into a system, including heat exchangers consisting of pipes for the purpose of cooling or heating air; |
| – | pressure accessory | Pressure Equipment Regulations 1 | “pressure accessory” means devices with an operational function having pressure-bearing housing; |
| – | pressure equipment | Pressure Equipment Regulations 1 | “pressure equipment” means a steam generator, pressure vessel, piping, pressure accessory and safety accessory, transportable gas container, and fire extinguisher and includes, but is not limited to, an accumulator, a hot-water geyser, and hyperbaric chambers; |
| – | pressure vessel | Pressure Equipment Regulations 1 | “pressure vessel” means a housing designed and manufactured to contain a fluid under a design pressure equal to or greater than 50 kPa; |
| – | provincial director | Pressure Equipment Regulations 1 | “provincial director” means the provincial director as defined in regulation 1 of the General Administrative Regulations promulgated by Government Notice No. R.1449 of 6 September 1996; |
| – | re-certification | Pressure Equipment Regulations 1 | “re-certification” means activities undertaken to determine appropriate design parameters for pressure equipment where such data is unknown or unavailable; |
| – | re-rating | Pressure Equipment Regulations 1 | “re-rating” means any change in the design parameters of pressure equipment which affects the certification; |
| – | repair | Pressure Equipment Regulations 1 | “repair” means restoration to original standard by the application of heat or welding to any pressure equipment, or the replacement of expanded tubes, and in the case of non-metallic equipment it means the application of heat, welding, solvent cement, laminate or curing of thermo-set; |
| – | reticulation | Pressure Equipment Regulations 1 | “reticulation” means the conveyance of gas by pipeline with a general operating pressure of no more that 200kPa to the ultimate points of consumption; |
| – | risk-based inspection | Pressure Equipment Regulations 1 | “risk-based inspection” means an inspection scope based on the results of a formal risk assessment, including inspection and test intervals; |
| – | safety accessory | Pressure Equipment Regulations 1 | “safety accessory” means a device designed to protect pressure equipment; |
| – | SANS 10227 | Pressure Equipment Regulations 1 | “SANS 10227” means the Standard Specification for the criteria for the operation of inspection authorities performing inspection in terms of the Pressure Equipment Regulations, SANS 10227, published by the South African Bureau of Standards; |
| – | SANS 10228 | Pressure Equipment Regulations 1 | “SANS 10228” means the Standard Specification for the identification and classification of dangerous goods for transport, SANS 10228, published by the South African Bureau of Standards; |
| – | SANS 10254 | Pressure Equipment Regulations 1 | “SANS 10254” means the Standard Specification for the installation, maintenance, replacement and repair of fixed electric storage water heating systems, SANS 10254, published by the South African Bureau of Standards; |
| – | SANS 151 | Pressure Equipment Regulations 1 | “SANS 151” means the Standard Specification for fixed electric storage water heaters, SANS 151, published by the South African Bureau of Standards; |
| – | SANS 347 | Pressure Equipment Regulations 1 | “SANS 347” means the Standard Specification for categorisation and conformity assessment criteria for all pressure equipment, SANS 347, published by the South African Bureau of Standards; |
| – | SANS/ISO 17020 | Pressure Equipment Regulations 1 | “SANS/ISO 17020” means the Standard Specification for general criteria for the operation of various types of bodies performing inspection, SANS 17020, published by the South African Bureau of Standards; |
| – | steam generator | Pressure Equipment Regulations 1 | “steam generator” means any apparatus to convert water continuously into steam at a pressure higher than that due to the atmosphere and where the heat is derived from a source other than steam, and includes any super heater or economiser which is an integral part of a steam generator or is separately fired there from, fired steam and hot-water boilers, waste-heat boilers, waste-incineration boilers, and electrode or immersion-type electrically heated boilers; |
| – | the Act | Pressure Equipment Regulations 1 | “the Act” means the Occupational Health and Safety Act, 1993 (Act No. 85 of 1993); |
| – | transportable gas container | Pressure Equipment Regulations 1 | “transportable gas container” means any refillable vessel for the storage and conveyance of liquefied, dissolved or compressed gases, of water capacity from 0,5 litres to 3 000 litres; |
| – | unique mark | Pressure Equipment Regulations 1 | “unique mark” means the mark and accreditation reference number of the approved inspection authority. |